Response of a coral-associated crustacean community to eutrophication

Seventy-five samples of the crustacean fauna associated with the coral Madracis mirabilis (Duchassaing and Michelotti) were obtained at five sites along the west coast of Barbados in 1985. Samples were analyzed to determine whether any community response to eutrophication was evident. Ordination (multidimensional scaling) and classification (group average clustering) based on Bray-Curtis dissimilarity measures separated the fauna of highly eutrophied sites from those that were less eutrophied. Dominance plots based on relative abundance and log-normal plotting methods were ineffective in distinguishing the fauna of eutrophied sites. The crustacean fauna responded to eutrophication mainly by reduction of density of animals. No differences in species richness, number of site endemic species or rare species were observed between highly eutrophied and less eutrophied sites. Nine indicator species of eutrophy were identified on the basis of strong density differences between sites.     

REGIONAL PLANNING FOR LAND DISPOSAL OF WASTEWATER1

ABSTRACT This paper describes the development and use of a mixed integer programming model for the planning of land disposal wastewater treatment facilities. Consideration is given to relevant construction and operating costs for land sites, transmission arteries, land acquisition costs, tangible benefits from land use, controls on aquifers, and various other engineering and technical constraints The model is used to determine which land disposal sites should serve which treatment plants, when initial construction should be initiated and completed, and when capacity expansion should occur. The model's application to the St. Louis Standard Metropolitan Statistical Area is illustrated and discussed.     

The effect of aldicarb on nematode population and its persistence in carrots,soil and hydroponic solution

Abstract

Aldicarb, Temik^® 15 G, was incorporated in furrows at 3.37 and 6.73 kg ai (active ingredent)/ha and carrots (Caucus carota L.) were directly seeded on the same day. The numbers of nematode larvae were significantly suppressed in the treated plots; averages were 249, 74, and 51/ 50 cc soil samples for control (0), 3.37 and 6.73 kg ai/ha, respectively. Aldicarb treatment resulted in a 28% yield increase as compared to the untreated. Aldicarb residue in carrots was 28 ppb for the low treatment and 46 ppb for the high. Residual levels in soil of high treatment declined from 6l to 31 ppb during two weeks prior to harvest, meanwhile, those in the low decreased slightly from 13 to 12 ppb. Carrots placed in hydroponic solution containing aldicarb 14.5 ppm for 6 days, had an aldicarb residue of 10.26 ppb and the hydroponic solution, 2.7 ppb. Persistence of aldicarb residue was in carrot > in soil > in hydroponic solution.     

Source Apportionment of Phoenix PM2.5 Aerosol with the Unmix Receptor Model

Abstract

The multivariate receptor model Unmix has been used to analyze a 3-yr PM_2.5 ambient aerosol data set collected in Phoenix, AZ, beginning in 1995. The analysis generated source profiles and overall average percentage source contribution estimates (SCEs) for five source categories: gasoline engines (33 ± 4%), diesel engines (16 ± 2%), secondary SO₄ ^2? (19 ± 2%), crustal/soil (22 ± 2%), and vegetative burning (10 ± 2%). The Unmix analysis was supplemented with scanning electron microscopy (SEM) of a limited number of filter samples for information on possible additional low-strength sources. Except for the diesel engine source category, the Unmix SCEs were generally consistent with an earlier multivariate receptor analysis of essentially the same data using the Positive Matrix Factorization (PMF) model. This article provides the first demonstration for an urban area of the capability of the Unmix receptor model.     

R&D Activities,Operating Experience Discussed at Fabric Alternatives Forum

ABSTRACT

Previously reported volatile organic compounds (VOC) radiocarbon (¹⁴C) measurements for 1992 summertime Atlanta, GA, have been compared with chromatographic data and emissions inventory predictions. The chromatographic approach that was used provided a more comprehensive VOC characterization than typically achieved, and the emissions inventory was research-grade level (date-, site-, and time-specific). The comparisons are in general agreement that biogenic emissions contribute only modestly (<10%) to the VOC content of the particular ambient samples that were collected and measured. The choices of sampling site (near city-center) and times (early morning and late evening) are major influences on the results, which consequently should not be regarded as representing the average VOC biogenic impact for the Atlanta area.     

Sensitivity analysis of the asymptotic behavior of a model for the environmental movement of radionuclides

The asymptotic behavior of a linear compartment model for the environmental movement of radionuclides is investigated. Here, the expression asymptotic behavior is used to designate the behavior of q(t) as t → ∞, where q is the solution of a vector differential equation of the form dq/dt = h + Kq. The asymptotic behavior of such equations is described. For the model and conditions under consideration, each element of q converges monotonically to a steady-state value. A hydrologic system is defined and used to illustrate this behavior. An approach to sensitivity analysis employing Latin hypercube sampling, rank transformations and stepwise regression is presented and then applied to this system. A total of 20 independent variables is introduced and the following dependent variables are investigated for the various components of the system: amount of radionuclide present at steady state. concentration of radionuclide at steady state, and time required to reach 90% of steady state. Finally, an application of asymptotic behavior in the analysis of a hypothetical site for the geologic isolation of high-level radioactive waste is described and a brief discussion of differential sensitivity analysis is given.     

Site Sampling and Treatability Studies for Demonstration of WasteChem’s Asphalt Encapsulation Technology Under EPA’s SITE Program

ABSTRACT

Exposures from indoor environments are a major issue for evaluating total long-term personal exposures to the fine fraction (<2.5μm in aerodynamic diameter) of particulate matter (PM). It is widely accepted in the indoor air quality (IAQ) research community that biocontamination is one of the important indoor air pollutants. Major indoor air biocontaminants include mold, bacteria, dust mites, and other antigens. Once the biocontaminants or their metabolites become airborne, IAQ could be significantly deteriorated. The airborne biocontaminants or their metabolites can induce irritational, allergic, infectious, and chemical responses in exposed individuals.

Biocontaminants, such as some mold spores or pollen grains, because of their size and mass, settle rapidly within the indoor environment. Over time they may become nonviable and fragmented by the process of desiccation. Desiccated nonviable fragments of organisms are common and can be toxic or allergenic, depending upon the specific organism or organism component. Once these smaller and lighter fragments of biological PM become suspended in air, they have a greater tendency to stay suspended. Although some bioaerosols have been identified, few have been quantitatively studied for their prevalence within the total indoor PM with time, or for their affinity to penetrate indoors.

This paper describes a preliminary research effort to develop a methodology for the measurement of nonvi-able biologically based PM, analyzing for mold and ragweed antigens and endotoxins. The research objectives include the development of a set of analytical methods and the comparison of impactor media and sample size, and the quantification of the relationship between outdoor and indoor levels of bioaerosols. Indoor and outdoor air samples were passed through an Andersen nonviable cascade impactor in which particles from 0.2 to 9.0 um were collected and analyzed. The presence of mold, ragweed, and endotoxin was found in all eight size ranges. The presence of respirable particles of mold and pollen found in the fine particle size range from 0.2 to 5.25 um is evidence of fragmentation of larger source particles that are known allergens.